TCX FORCE Battery Power Ascender
TCX FORCE Battery Power Ascender
TCX FORCE Battery Power Ascender
TCX FORCE Battery Power Ascender
TCX FORCE Battery Power Ascender

TCX FORCE Battery Power Ascender

 

TCX package contains:

  • 1 x SKB roller black hard case w/ foam insert
  • 1 x TCX FORCE Battery Ascender color GREEN
  • 1 x ActSafe charger
  • 2 x LiFe ActSafe battery 140 Wh
  • 1 x Wireless controller
  • 1 x USB charging cable
  • 1 x Steel Rock Exotica carabiner

An annual service is recommended with an ActSafe approved service agent.

When in use, any ActSafe ascender end user shall record a daily inspection checklist and daily battery charging procedure following the manual section E. Failure to provide an inspection history of any ActSafe product voids all warranties.Recommend Papertrail electronic PPE inspection software.

Transport of any ActSafe battery and gasoline product is the end user’s responsibility and shall follow the relevant carrier’s dangerous goods policy when applicable.

Financing

Want an easy monthly payment plan over 24 - 60 months? Finance plans are available for our ActSafe ACX and PMX products only.

Crest Capital Equipment Leasing

In Partnership with
Crest Capital Equipment Financing

Manuals:

Working Load Limit: 250kg (550lbs)
Speed: 0-24m/min (0-78 ft/min)

The TCX Force Ascender
The TCX Force Ascender is developed by ActSafe. Design, power train and batteries are specially developed for this model. The TCX IP-67 Ascender range is designed for maximum endurance, it is rain and splash proof (IP-67) and optimized for heavy lifting and silent operation.

Speed
The maximum ascending speed is 24 meter/min.
High precision control allows accurate continuous speed control from 0 to 24 meters per minute. In addition the well balanced acceleration characteristics contribute to the very precise control of the ascender.
Speed and direction is controlled with one hand (left) only hence the operator always has one hand free.

Battery System & Range
The TCX Ascender has a interchangeable battery. The range in meters before a recharge of the battery is needed depends on speed, load, direction and surrounding temperature. Typically you will get around 200m meter continuous drive with a 100kg load. 

The battery capacity is monitored and displayed by the help of LED on the battery. The operator has full overview off the remaining battery power.
The battery is removable and docked into the charger for recharging. The charging time is less than 90 minutes.

Lifting Capacity
The TCX Force Ascender is optimized for lifting a fully equipped operator and patient, i.e. between 80-250kg. Sufficient enough for lifting a medic with patient and stretcher.
The load is monitored and the ascender will be switched off automatically in case of an over load (>250kg) to protect the batteries and the rope installation.

Operator interface
The TCX Ascender has straight forward operator interface. The operator has full control of speed, direction and battery power -even under trying circumstances. The ascender is operated with one hand only via a patented bi-directional throttle handle.

Temperature range
Low temperature will affect the battery capacity whilst high temperature will make heat dissipation harder. The control electronics of the TCX Ascender monitors surrounding temperature as well as internal temperature and adapts performance accordingly, all in order to optimize the battery capacity and heat dissipation.

Rope
Rope loading is extremely fast and straight forward. The rope can easily be loaded to the ascender in darkness or under water and that in less than 10 seconds. The rope grab system is designed for 11mm kernmantel ropes.

Weight
The weight of the TCX Force Ascender is 13kg (incl. battery).

Noise
The noise generated by the ascender is depending on speed and load. At low speed it is literally silent.

Remote control
The TCX Ascender is equipped with a Bluetooth remote control system. Speed (slow/medium/fast) and direction can be controlled up to a distance of 150 meters (non-line of sight). Since the remote control overrides the controls of the ascender it can be used in rescue operations. In case the operator is unable to continue the ascent/descent; with the use of the remote he can be rescued by another person ascending/descending him to a safe location.
The remote control enables numerous possibilities when it comes to access methods. The ascender can be attached at the anchor point and the operator connected to the end of the rope only, having full control of ascent/descent.

Emergency descender
The TCX Ascender can descend mechanically as well. Hence the operator can descend even without battery power.

Regular price $16,500.00 Sale

  • PRODUCT DETAILS
  • SHIPPING
  • WARRANTY & RETURNS
  • REVIEWS

 

TCX package contains:

  • 1 x SKB roller black hard case w/ foam insert
  • 1 x TCX FORCE Battery Ascender color GREEN
  • 1 x ActSafe charger
  • 2 x LiFe ActSafe battery 140 Wh
  • 1 x Wireless controller
  • 1 x USB charging cable
  • 1 x Steel Rock Exotica carabiner

An annual service is recommended with an ActSafe approved service agent.

When in use, any ActSafe ascender end user shall record a daily inspection checklist and daily battery charging procedure following the manual section E. Failure to provide an inspection history of any ActSafe product voids all warranties.Recommend Papertrail electronic PPE inspection software.

Transport of any ActSafe battery and gasoline product is the end user’s responsibility and shall follow the relevant carrier’s dangerous goods policy when applicable.

Financing

Want an easy monthly payment plan over 24 - 60 months? Finance plans are available for our ActSafe ACX and PMX products only.

Crest Capital Equipment Leasing

In Partnership with
Crest Capital Equipment Financing

Manuals:

Working Load Limit: 250kg (550lbs)
Speed: 0-24m/min (0-78 ft/min)

The TCX Force Ascender
The TCX Force Ascender is developed by ActSafe. Design, power train and batteries are specially developed for this model. The TCX IP-67 Ascender range is designed for maximum endurance, it is rain and splash proof (IP-67) and optimized for heavy lifting and silent operation.

Speed
The maximum ascending speed is 24 meter/min.
High precision control allows accurate continuous speed control from 0 to 24 meters per minute. In addition the well balanced acceleration characteristics contribute to the very precise control of the ascender.
Speed and direction is controlled with one hand (left) only hence the operator always has one hand free.

Battery System & Range
The TCX Ascender has a interchangeable battery. The range in meters before a recharge of the battery is needed depends on speed, load, direction and surrounding temperature. Typically you will get around 200m meter continuous drive with a 100kg load. 

The battery capacity is monitored and displayed by the help of LED on the battery. The operator has full overview off the remaining battery power.
The battery is removable and docked into the charger for recharging. The charging time is less than 90 minutes.

Lifting Capacity
The TCX Force Ascender is optimized for lifting a fully equipped operator and patient, i.e. between 80-250kg. Sufficient enough for lifting a medic with patient and stretcher.
The load is monitored and the ascender will be switched off automatically in case of an over load (>250kg) to protect the batteries and the rope installation.

Operator interface
The TCX Ascender has straight forward operator interface. The operator has full control of speed, direction and battery power -even under trying circumstances. The ascender is operated with one hand only via a patented bi-directional throttle handle.

Temperature range
Low temperature will affect the battery capacity whilst high temperature will make heat dissipation harder. The control electronics of the TCX Ascender monitors surrounding temperature as well as internal temperature and adapts performance accordingly, all in order to optimize the battery capacity and heat dissipation.

Rope
Rope loading is extremely fast and straight forward. The rope can easily be loaded to the ascender in darkness or under water and that in less than 10 seconds. The rope grab system is designed for 11mm kernmantel ropes.

Weight
The weight of the TCX Force Ascender is 13kg (incl. battery).

Noise
The noise generated by the ascender is depending on speed and load. At low speed it is literally silent.

Remote control
The TCX Ascender is equipped with a Bluetooth remote control system. Speed (slow/medium/fast) and direction can be controlled up to a distance of 150 meters (non-line of sight). Since the remote control overrides the controls of the ascender it can be used in rescue operations. In case the operator is unable to continue the ascent/descent; with the use of the remote he can be rescued by another person ascending/descending him to a safe location.
The remote control enables numerous possibilities when it comes to access methods. The ascender can be attached at the anchor point and the operator connected to the end of the rope only, having full control of ascent/descent.

Emergency descender
The TCX Ascender can descend mechanically as well. Hence the operator can descend even without battery power.

Shipping:

Only sold as a PAK –items are not sold individually.

We do not ship outside the USA. We ship ground UPS domestic only.

Please allow one (1) week leadtime.

Warranty:

Manufacturer's warranty is one year on all products.

Exclusions from the guarantee:

  • normal wear
  • oxidation
  • leaking batteries
  • modifications or alterations
  • poor storage
  • poor maintenance
  • damage due to accident or negligence
  • damage due to use of product for which it is not designed
  • the serial number is no longer legible
  • any label has been removed from a harness
  • a helmet has been written on with a marker or covered by stickers
  • the product has been modified or repaired by a third person

Product Return Policy:

For liability reasons, and your personal safety, we cannot accept returns on any product including hardware, ropes or slings at anytime excluding warranty situations or shipping errors. (Please note shipping costs for warranty issue and repair products is the customer's responsibility.)

Because we cannot accept returns, please be absolutely sure of the items you are purchasing before submitting your order.